SLU 14
Wall-mounted tap for cold and hot water, 24V DC
Vi beklager, men dette produkt er ikke længere i vores sortiment. Prøv venligst at vælge et andet fra vores sortiment
Egenskaber
- SLU 14 - polished finish
- function of automatic water stop after 5 minutes of continuous flow
- water is flowing as long as hands are in the active range (max. range to 0,3 m)
- water stops flowing after removal of hands from the active range of sensor after adjustable time delay
- adjustable time delay from 0,25 to 7,75 sec.
- possibility of changing of time delay, active range and switching off by SLD 03
- washbasin tap is destined for cold or premixed water, water temperature is regulated by ball valve
- START/STOP program
- Ordrenummer: 03140
Jeg er interesseret i mere information:
Leveringsspecifikation
SLU 14 - supply No. 03140 - stainless steel cover with an integrated electronics; spout 125 mm; plastic mounting box with brass screw-coupling, electromagnetic valve (1 pc.) and ball valve
Tekniske oplysninger
| Stainless steel cover dimension: | 160 x 180 x 3 mm |
| Mounting box dimension: | 140 x 140 x 75 mm |
| Operating voltage: | 24V DC external |
| Active range: | standard 0 - 0,3 m, START/STOP program 0,05-0,1 m |
| Recommended flow pressure: | 0,1 - 0,6 MPa |
| Rate of flow: | 12 l/min. (inf. data) |
| Water inlet: | male thread G 3/4“ |
Downloads
- Monteringsvejledning (1.19 MB)
- Katalogblad (202.64 kB)
Tilbehør
Visningen af produkterne på hjemmesiden er kun til orientering. Producenten forbeholder sig retten til at foretage tekniske ændringer eller ændringer af parametre. Producenten gør alt for at holde de offentliggjorte oplysninger så opdaterede som muligt, men garanterer ikke, at alle data er nøjagtige og aktuelle på tidspunktet.
